Addressing the stability issue of perovskite solar cells for commercial applications.

Abstract When translating photovoltaic technology from laboratory to commercial products, low cost, high power conversion efficiency, and high stability (long lifetime) are the three key metrics to consider in addition to other factors, such as low toxicity, low energy payback time, etc. As one of the most promising photovoltaic materials with high efficiency, today organic–inorganic metal halide perovskites draw tremendous attention from fundamental research, but their practical relevance still remains unclear owing to the notorious short device operation time. In this comment, we discuss the stability issue of perovskite photovoltaics and call for standardized protocols for device characterizations that could possibly match the silicon industrial standards

Author Correction: Solution-processed hybrid perovskite photodetectors with high detectivity.

This Article contains an error in Equation 2 in that the denominator is inverted. This has not been fixed in the PDF or HTML versions of the Article but can be seen in the associated Correction

High-efficiency robust perovskite solar cells on ultrathin flexible substrates.

Wide applications of personal consumer electronics have triggered tremendous need for portable power sources featuring light-weight and mechanical flexibility. Perovskite solar cells offer a compelling combination of low-cost and high device performance. Here we demonstrate high-performance planar heterojunction perovskite solar cells constructed on highly flexible and ultrathin silver-mesh/conducting polymer substrates. The device performance is comparable to that of their counterparts on rigid glass/indium tin oxide substrates, reaching a power conversion efficiency of 14.0%, while the specific power (the ratio of power to device weight) reaches 1.96 kW kg(-1), given the fact that the device is constructed on a 57-μm-thick polyethylene terephthalate based substrate. The flexible device also demonstrates excellent robustness against mechanical deformation, retaining >95% of its original efficiency after 5,000 times fully bending. Our results confirmed that perovskite thin films are fully compatible with our flexible substrates, and are thus promising for future applications in flexible and bendable solar cells

A polymer tandem solar cell with 10.6% power conversion efficiency.

An effective way to improve polymer solar cell efficiency is to use a tandem structure, as a broader part of the spectrum of solar radiation is used and the thermalization loss of photon energy is minimized. In the past, the lack of high-performance low-bandgap polymers was the major limiting factor for achieving high-performance tandem solar cell. Here we report the development of a high-performance low bandgap polymer (bandgap <1.4 eV), poly[2,7-(5,5-bis-(3,7-dimethyloctyl)-5H-dithieno[3,2-b:2',3'-d]pyran)-alt-4,7-(5,6-difluoro-2,1,3-benzothia diazole)] with a bandgap of 1.38 eV, high mobility, deep highest occupied molecular orbital. As a result, a single-junction device shows high external quantum efficiency of >60% and spectral response that extends to 900 nm, with a power conversion efficiency of 7.9%. The polymer enables a solution processed tandem solar cell with certified 10.6% power conversion efficiency under standard reporting conditions (25 °C, 1,000 Wm(-2), IEC 60904-3 global), which is the first certified polymer solar cell efficiency over 10%

Interfacial Degradation of Planar Lead Halide Perovskite Solar Cells

ABSTRACT: The stability of perovskite solar cells is one of the major challenges for this technology to reach commercialization, with water believed to be the major degradation source. In this work, a range of devices containing different cathode metal contacts in the configuration ITO/PEDOT:PSS/MAPbI 3 /PCBM/Metal are fully electrically characterized before and after degradation caused by steady illumination during 4 h that induces a dramatic reduction in power conversion efficiency from values of 12 to 1.8%. We show that a decrease in performance and generation of the S-shape is associated with chemical degradation of the metal contact. Alternatively, use of Cr 2 O 3 /Cr as the contact enhances the stability, but modification of the energetic profile during steady illumination takes place, significantly reducing the performance. Several techniques including capacitance−voltage, X-ray diffraction, and optical absorption results suggest that the properties of the bulk perovskite layer are little affected in the device degradation process. Capacitance−voltage and impedance spectroscopy results show that the electrical properties of the cathode contact are being modified by generation of a dipole at the cathode that causes a large shift of the flat-band potential that modifies the interfacial energy barrier and impedes efficient extraction of electrons. Ionic movement in the perovskite layer changes the energy profile close to the contacts, modifying the energy level stabilization at the cathode. These results provide insights into the degradation mechanisms of perovskite solar cells and highlight the importance to further study the use of protecting layers to avoid the chemical reactivity of the perovskite with the external contacts

Addressing the stability issue of perovskite solar cells for commercial applications.

When translating photovoltaic technology from laboratory to commercial products, low cost, high power conversion efficiency, and high stability (long lifetime) are the three key metrics to consider in addition to other factors, such as low toxicity, low energy payback time, etc. As one of the most promising photovoltaic materials with high efficiency, today organic–inorganic metal halide perovskites draw tremendous attention from fundamental research, but their practical relevance still remains unclear owing to the notorious short device operation time. In this comment, we discuss the stability issue of perovskite photovoltaics and call for standardized protocols for device characterizations that could possibly match the silicon industrial standards